Mettler Toledo PS6L Spezifikationen PDF herunterladen (Seite 28)

Chapter 2: Installation

2-11 (08/09)

Installing the Ball

and Roller Top

Transfer Platter

A ball top or roller top transfer platter is available for the PS60 and PS90. To install the

ball or roller transfer platter:

1. Remove the platter supplied with the PS. PS90 can be ordered without a platter.

2. Place the ball or roller top transfer platter on the PS scale.

3. Ensure that the ball or roller top transfer platter drops into place without mechanical

interference.

Note: If the unit fails to capture zero, reboot the scale by cycling power (unplug the

Wall transformer and/or USB cable). Reconnect the power source. If the scale still fails

to capture zero, re-calibration will be required.

Installing Conveyor

Drop in Kit for PS90

The Conveyor drop in kit includes two adjustable width rail brackets that allow a PS90

scale to be integrated into a standard gravity conveyor, between 22 and 32 inches. The

kit is designed for standard conveyors that use 1.9” diameter rollers on a frame that

supports 1.5” spacing increments.

WARNING! DO NOT ATTEMPT TO INSTALL THIS KIT IN A POWERED

CONVEYOR.

For Conveyor Drop-In-Kit

64058112:

Reference detailed instruction set

64058111 inside shipping box or

obtain copy on

www.mt.com/ind-psscale.

The PS90 scale can be mounted lengthwise or transverse in the conveyor frame for the

Ball Top Platter. The ball-top platter

allow

s packages to be rotated easily

when on the scale. This option is

commonly used when packages have

labels that must be scanned at the

shipping station.

The PS90 scale should always be

mounted lengthwise when used with

the roller-top platter. The roller-top

platter is commonly used when

packages are significantly larger than

the scale.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 74 75

Keine Kommentare

Mettler Toledo PS6L Spezifikationen Seite 28